Unitech MS860G Specifications download pdf (Page 37)

MS860G WiFi Manual 33

SCANNER CONFIGURATION MANAGER

Bar Code Symbologies, continued

Codabar

• Enabled toggles the ability for the scanner to read Codabar

on or off.

Default is “Yes”.

• Code ID is a user-definable identification letter for Codabar,

which is referred to in the “Use Code ID” function on page 25.

Default is

letter “N”.

• Send Start/Stop toggles sending or not sending start/stop

sentinels.

Default is “No Send”.

• Check Digit defines whether or not a check digit (to insure

data accuracy) is calculated, and if so, whether it should be

sent or not.

Default is “Not Calculate”.

• CLSI Format deletes the start and stop sentinels, and outputs

the data with spaces inserted after the 1st, 5th, and 10th

characters.

Default is “No”.

• Minimum Length defines the minimum length the user will

accept for a valid bar code.

Default is “3”.

• Maximum Length defines the maximum length the user will

accept for a valid bar code.

Default is “48”.

UPC-A

• Enabled toggles the ability for the scanner to read UPC-A on or

off.

Default is “Yes”.

• Code ID is a user-definable identification letter for UPC-A,

which is referred to in the “Use Code ID” function on page 25.

Default is

letter “A”.

• Send Leading Digit toggles sending or not sending a leading

(‘start bar code’) digit.

Default is “Send”.

• Send Check Digit toggles sending or not sending a check

digit.

Default is “Send”.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 80 81

No comments

Unitech MS860G Specifications Page 37