Unitech MS100 User Manual download pdf (Page 19)

MS100 Manual

Bar Code Symbologies, continued

Standard 2 of 5 / Toshiba Code (China Postal Code)

Maximum Length defines the maximum length the user will

accept for a valid bar code. Default is “48”.

•

Minimum Length defines the minimum length the user will

accept for a valid bar code. Default is “4”.

•

Check Digit defines whether or not a check digit (to insure data

accuracy) is calculated, and if so, whether it should be sent or

not. Default is “Not Calculate”.

•

Fix Length (by first 3 reads) fixes the length of acceptable

subsequent bar code reads from the first three bar codes read.

Useful as a data verification if all bar codes are of a consistent

length. Default is “No”.

•

Toshiba Code ID is the same as S25 Code ID (above), but

instead applicable to Toshiba Code. Default is letter “C”.

•

S25 Code ID is a user-definable identification letter for S 2 of 5,

which is referred to in the “Use Code ID” function (see page 11).

Default is letter “H”.

•

Enabled toggles the ability for the keyboard/scanner to read S 2

of 5 / Toshiba Code on or off. Default is “No”.

•

Interleaved 2 of 5

Enabled toggles the ability for the keyboard/scanner to read I 2

of 5 on or off. Default is “Yes”.

•

Code ID is a user-definable identification letter for I 2 of 5, which

is referred to in the “Use Code ID” function (see page 11).

Default is letter “I”.

•

Fix Length (by first 3 reads) fixes the length of acceptable

subsequent bar code reads from the first three bar codes read.

Useful as a data verification if all bar codes are of a consistent

length. Default is “No”.

•

Check Digit defines whether or not a check digit (to insure data

accuracy) is calculated, and if so, whether it should be sent or

not. Default is “Not Calculate”.

•

Suppress Digit suppresses the output of the first or last bar

code digit. Default is “Not Suppressed”.

•

Minimum Length defines the minimum length the user will

accept for a valid bar code. Default is “10”.

•

Maximum Length defines the maximum length the user will

accept for a valid bar code. Default is “64”.

•

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

Comments to this Manuals

No comments

Unitech MS100 User Manual Page 19

Comments to this Manuals

Related products and manuals for Bar code readers Unitech MS100